vFIX Toilets and Urinals Automatic Electrical Systems Installation Services

• Automatic electric toilet and urinal installation service
• Does not include pipe work and dismantling and moving the installation point. Wastewater pipe improvement Including a guarantee for damage caused by demolition of the old one in all cases.
• Wiring and various pipes are floating.
• This service requires an on-site survey. To offer a price before entering the service
• The survey fee of 700 baht can be used as a discount on the installation fee. When purchasing services priced at 3,000 baht or more
• Waterproof blocks, sockets, stop valves, water lines and wastewater equipment must be provided by the customer.
• Services are provided by a team of professional technicians who have been trained in skill standards from the Department of Skill Development.
• Work guaranteed after installation for 180 days (in the case of normal use)
• Installation time approximately 2 hours (depending on the job site).
• Number of service technicians: 2 people

Standard equipment included in the installation fee

• Electrical cable size 2x2.5 Sq.mm., length not exceeding 4 meters.
• Ground wire size 1x1.5 Sq.mm.
• White plastic rail Length not more than 2.5 meters

Additional prices for equipment used other than those specified will be charged at this rate.

• Water hose size 1/2 x 3/4 inches, length 16 inches, price 79.-
• Good water hose, size 1/2 x 1/2 inches, length 16 inches, price 65.-
• 1-way stop valve 1/2 x 1/2 inches, length 16 inches, price 179.-

Standard work procedures

1. Steps before entering work
   • Check the product to see if it is in a condition ready for installation or not. The type of sanitary ware corresponds to the characteristics of the pipes for which the sewage is prepared. Or the stop valve position is not attached to the toilet seat. (In the case that the product is the wrong type or is damaged and cannot be installed on site, the technician will notify the vFIX Contact Center to proceed with further corrections, such as changing or returning the product completely before installation.)
   • Check the installation point before working. In the case that the installation point is not ready Sewage pipe distance The distance from the wall to the middle of the pipe was not 30.5 cm. The technician informed vFIX Contact Center to coordinate with customers and branches. to find solutions
   • Installation of a type that changes the style of sanitary ware from a scoop to a flush toilet. There should be a ventilation pipe system. and improve the distance of the sewage pipes under the base and work on decorating the support points before installation. And there is a connection point to install the bile valve into the toilet and the bidet hose.
   • Installation of a hanging sink, floor stand, drainage pipe distance, and water according to the product specified.
   • Installing a hanging urinal in a corner or horizontal position Sewerage and water pipe distance as specified by the product
2. Steps during work
   • Install the water and wastewater pipe connection locations to suit the installation distance of the sanitary ware and sink.
   • Lay out the product template paper and mark the installation hole points. So that the sanitary ware and sink are not too close to the wall.
   • Shoot the anchor and place the base leg fixing device according to the template position or fix the support point. and insert the rubber ball or installation equipment Then place it into the installation position.
   • Attach the water line to the water tank and install the valve cylinder.
   • Attach the wastewater connector to the toilet bowl or sink.
   • Assemble the water tank cover and install the toilet seat cover.
3. Steps for checking work
   • Check the sanitary system by opening the lid of the water tank behind the sanitary ware to see if all equipment is installed or not.
   • Press the bidet to check whether the float system is working normally or not, and when water is added, there must be no sound of water flowing again. (If there is a sound, it means there is a water leak occurring.)
   • The toilet bowl must be installed securely, the silicone sealant work must be neatly kept and there must be no leaks.
   • Check the sink and see if the drainage system is normal or not. And look at the drainage channel, is there any water dripping or not? Is the faucet open and flowing normally and must it be firmly fixed and not rotated?
   • Everything was tested and the technician cleaned the toilet and bathroom. Completely inspected and can be used normally. The technician has the customer sign the work assignment through the STS system.
4. Instructions for use and how to take care of it Ready to deliver work
   • Do not throw any materials into the toilet bowl. Because it may cause blockage. and the wastewater system is damaged
   • Microorganisms should be put into the toilet to decompose waste in the treatment tank better and reduce odor.

Installation service conditions

1. Installation requirements It is an installation work completed at one time.
   • On-site survey service fee 700.- when the customer purchases work according to a quotation of 3,000.- or more (in the case of purchasing work less than 3,000.-, the right is reserved not to refund the survey fee).
   • The above price is the price of complete equipment installation, dismantling fee, and sanitary material transportation fee only. Does not include pipe work and site improvements to change usage patterns.
   • Wiring and various pipes are floating.
   • We reserve the right to not accept exchanges or returns for products that have been installed.
   • In case there is a change in work or additional work Always contact vFIX Contact Center first, call 1308.
   • Customers must prepare the worksite area 100% completely before installation.
   • We reserve the right not to accept installation services in risky and dangerous areas.
   • We reserve the right to install in areas that already have water and electricity.
   • In the case of equipment other than the standard included with the product and used in installation, no additional labor charge
   • If the customer does not provide water pipe equipment for the sanitary ware and sink, additional payment will be required at the job site.
   • In the case where the old sewage pipe has been moved Customers prepare accessories to install odor protection.
   • The company will not be responsible for any damages resulting from the following cases.
     • The customer hires a third party to do the installation. or modify the company's installation work
     • The customer hires or has the company's technicians install it. Work other than the items specified in the work report. without going through the company
2. Installation warranty
   • Installation is guaranteed for 180 days, which is based on normal use only.
   • In the case that the customer wishes to move the installation point or install the old one, labor will be charged according to the service fee table above.

Scope of service area

• Areas nearby VFIX branches, Bangkok and surrounding areas
• Provincial branch areas
  • Central region: Nakhon Pathom / Ayutthaya
  • Eastern Region : Chachoengsao / Bowin / Pattaya / South Pattaya / Chonburi / Sri Racha / Amata Nakorn / Bang Saen / Ban Chang / Rayong
  • Northeastern region: Khon Kaen / Mittraphap Khon Kaen / Nakhon Ratchasima / Pak Chong
  • Northern region: Chiang Mai / Chiang Mai Airport
  • Southern Region : Phuket / Phuket 1
• Free for the first 30 kilometers only from the VFIX branch in Thai Watsadu or BNB Home mentioned above.
• From kilometer 31 onwards, additional distance is charged at 10 baht per kilometer.

Note:

• In the event of requesting a reschedule of service appointment, please notify us at least 2 days in advance (during office hours from 7:00 am to 8:00 pm) at phone number 1308. Rescheduling can be done a maximum of 2 times.
• In case there is no notification for rescheduling the appointment, or if the technician has traveled and cannot proceed due to lack of customer notification of the project details or being outside the working hours in the service area, the company reserves the right to charge a travel fee of 300 Baht per visit.
• For service changes/returns or cancellations, they can be canceled within 14 days from the date of purchase confirmation in the system.
• We reserve the right not to refund the installation or usage fees in all cases, including standard installation equipment, which cannot be changed, cut, returned, or discounted.
• We reserve the right to change prices and service conditions without prior notice. The service fee is net price including VAT, excluding property relocation fees.
• We ask for customer cooperation in storing and moving property of value out of the service area, as the company will not be liable for any damage, loss, or disappearance in any case.
• We request permission to take photos of the customer's service area for assessment purposes in providing the service.
• If the customer incurs parking fees for the service area, additional charges may be billed later by the company.
• If the customer requires additional services or has inquiries regarding the service, please contact the Contact Center at phone number 1308.